RepRapPro Huxley print settings
Revision as of 18:31, 7 December 2011 by Adrianbowyer (talk | contribs) (Created page with 'This page will become more useful as more data is added, so please feel free to add to this table: Material Bed Temp Nozzle temp Comments Faberdashery Arctic White PLA 95C* 200C…')
This page will become more useful as more data is added, so please feel free to add to this table:
Material Bed Temp Nozzle temp Comments Faberdashery Arctic White PLA 95C* 200C Has been proven to stick to bare Aluminium as well as Kapton.
Orbi-Tech red PLA 60C 195C Works with Kapton
Sun Ya Tech White ABS 110C 220C Sticks well to Kapton and glass with no warping
- Recent prints utilising most of the bed area have exhibited some warping, which cannot be eliminated by the application of nail polish remover. We have dropped the bed temperature to 85C and the parts appear to adhere better to the bed. If more people report the same experience, we could update the table with the new value.
