RUG/Pennsylvania/State College/Printers/Thing-O-Matic
Operating Specifications
Operating Specifications | |||||||
---|---|---|---|---|---|---|---|
Name | Status | Design | Electronics | Firmware | Extruder | Temperature | Comments |
ToM Mk6+ | Working | Makerbot Thing-O-Matic | Generation 4 | v3.1 | Stepstruder Mk6+ | 225C | Working correctly. Use ReplicatorG 0037 and SF35. ABS ONLY, no PLA. |
Current Status
Date | Notes |
---|---|
1 April 2014 | Successfully printed a service print on the bot |
29 April 2014 | First successful complete print |
15 April 2014 | Parts warping badly. Strange settings issues. |
27 February 2014 | Replacement IC arrived |
29 February 2014 | Replacement chip installed |
17 February 2014 | Infamous toolhead 0 not found issue. Suspecting an IC on the motherboard or EC |
Details
PSU Unit ToM
- Model: Makerbot Thing-o-Matic Mk6+
- Owner: Dr. Timothy Simpson
- Bot No. 4283
- Assembled: December 2011
Gallery
Jarred (talk) 11:39, 2 May 2014 (PDT)
|