This page is for information about the PSU Unit Blue and White. This printer is designed to be an Open Hybrid Mendel, or OHM for short. This printer is part of the Penn State class EDSGN 497J. The project was originally started in Spring 2013 but was only a frame at the end of that semester. It was worked again in the Fall Semester when the final assembly was finally finished.
Log
| Date
|
Modification / Problem
|
| 12/05/2013
|
Updated wiki page to show current status. Printer has all components added and is awaiting testing and callibration.
|
Operating Specifications
| Design
|
Ohm
|
| Electronics
|
RAMPS
|
| Firmware
|
|
| Extruder
|
0.35mm
|
Photos
About this printer
This printer is designed to be an Open Hybrid Mendel, or OHM for short.
It is finished and as of last class needs to be tested and calibrated.
Builders
