RUG/Pennsylvania/State College/Electronics/RAMPS

From RepRap
Revision as of 21:19, 29 November 2011 by Ksalitrik (talk | contribs)
Jump to: navigation, search

Since the RAMPS electronics seems to be one of the best bets for the alternate electronics on the PRUSA RepRaps this is a compiled list of where to purchase and the cost. Some of these are located in America and other companies are International.

The company ULTIMACHINE seems to be the best bet for cheap electronics in the US. also purchasing the stepper controllers from them also seems like a good idea as they come with heatsinks for only $1. I would recommend purchasing the unassembled kit

pololu needs heat sink ultimachine sells them for 1.50 or 14 for board and heatsink for 14 might be best choice kits

http://ultimachine.com/content/ramps-pre-assembled-kit-complete

  • $200 everything 4 steppers, and end stops

http://ultimachine.com/content/ramps-pre-assembled-kit

  • $85 the board fully assembled

http://ultimachine.com/content/ramps-diy-kit-complete

  • $162 unassembled kit but has pololu and end stops

http://ultimachine.com/content/ramps-diy-kit

  • $50 just the board and electronics

http://ultimachine.com/ramps

  • $10 this is just the ramps board no electronics

http://reprapsource.com/shop/show/6603

  • 49.9 Euros built

http://xyzprinters.com/23-ramps

  • 7.97 Euros board
  • 30.67 Euros electronics
  • 72.26 Euros ramps everything unassembled
  • 33.60 Euros ramps board un assembled

https://shop.grrf.de/electronics-c-68.html also sells the pcb but also Euros

Retrieved from "https://reprap.org/mediawiki/index.php?title=RUG/Pennsylvania/State_College/Electronics/RAMPS&oldid=48101"