R2C2 RepRap Electronics

From RepRap
Revision as of 04:41, 4 October 2010 by Casainho (talk | contribs) (HB RepRap Electronics: UNPAUSE problem / solution.)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
HB RepRap Electronics

Release status: unknown

No image available.png
HB RepRap Electronics
CAD Models
External Link

HB RepRap Electronics

This electronics and firmware are being developed by User:Casainho (HardwareBox company) and will be commercialized on Ebay (including the releasing of source files) to worldwide 15 November 2010. The electronics and firmware will be released under the GPL, as Open Source electronics that work with / and are fully compatible with RepRap software and others alike.

It will be just one board, with an ARM 32bits microcontroller running at 100MHz, making possible to print at higher speeds. It will have an USB bootloader working as USB Flash Disk, meaning it will be hacker friendly - users will be able to quick copy-paste/hacking the firmware. All the firmware is being developed with OpenSource tools: ARM GCC, ARM GDB, OpenOCD JTAG Programmer/Debugger and Eclipse.