Prusa i3 Rework Bill of materials

From RepRap
Revision as of 23:22, 4 January 2014 by Dark Alchemist (talk | contribs) (→‎Screws, nuts and washers)
Jump to: navigation, search

English •  العربية •  български •  català •  čeština •  Deutsch •  Ελληνικά •  español •  فارسی •  français •  hrvatski •  magyar •  italiano •  română •  日本語 •  한국어 •  lietuvių •  Nederlands •  norsk •  polski •  português •  русский •  Türkçe •  українська •  中文（中国大陆）‎ •  中文（台灣）‎ •  עברית •  azərbaycanca • 


Introduction | Bill of materials | Y-axis assembly | X-axis assembly | Connecting X-axis and Z-axis | Motor assembly

X and Y-axis motions | Heated bed assembly | Extruder assembly | Electronics and wiring | Marlin Firmware

Printed parts

Printed parts needed to build the Prusa i3 Rework.

Extruder

Parts needed to build the Prusa i3 Rework.

Smooth and threaded rods

  • 2x Smooth rod Ø8x320 mm
  • 2x Smooth rod Ø8x350 mm
  • 2x Smooth rod Ø8x370 mm
  • 2x Threaded rod M5x300 mm
  • 4x Threaded rod M10x210 mm
  • 2x Threaded rod M10x380 mm

Mechanical parts

Mechanical parts needed to build the Prusa i3 Rework.

Heated bed

Parts needed to build the heated bed of Prusa i3 Rework.

Electronics

Electronics needed to build the Prusa i3 Rework.

Screws, nuts and washers

Screws, nuts and washers needed to build the Prusa i3 Rework.

Aluminium frame

  • 1x Single frame
  • 1x Heated bed mount
Retrieved from "https://reprap.org/mediawiki/index.php?title=Prusa_i3_Rework_Bill_of_materials&oldid=114528"