PonokoZFrameAssembly
Revision as of 01:37, 20 November 2008 by VikOlliver (talk | contribs) (version migrated from twiki)
Assembling The Ponoko RepRap Z Frame
UNDER CONSTRUCTION
First off, let me don my "Mr Safety" hat and point out that there is a high probability of an accident in putting this framework together. You do not want to see a sight like this coming at your retina at speed:
Please put something on top of the pointy-up poles you are about to install so that there is no room on top for an eyeball:
-- Main.VikOlliver - 19 Nov 2008
- Parts for Z Axis Idlers:
- 4 Z guide rods fitted:
- Fitting grub screw and nut to Corner Assembly.:
- Z Motor removed:
- All Z guide rods secured:
- Locked nuts on Z Idler:
- Removing 3mm disc from Z Motor:
- Parts for Z drive rod:
- Bed Mount and nut on Z Drive Rod:
- Z Motor disc fitted to Z Drive Rod:
- Z Motor disc fitted back, minus washers:
- Locked nuts on top end of Z Idler:
- Pats for top of Z frame:
- Top of Z Frame showing Opto Brackets:
- Squaring top frame: