P3Steel Y axis assembly

From RepRap
Revision as of 17:29, 21 November 2014 by AndrewBCN (talk | contribs)
Jump to: navigation, search

We'll do this in four easy steps:

  1. Y idler end assembly.
  2. Y motor end assembly.
  3. Y smooth rods and carriage installation.
  4. Y belt installation.

Each step requires 15~20 minutes, so set aside one evening for the Y axis assembly.


Y idler end assembly

For this step we require these tools (besides the M3 hey key we used to assemble the frame):

M8 hex key and 14mm wrench.



A small metal file and M3 hex key.

A small hammer.

Y-axis assembly minus the GT2 belt.

Retrieved from "https://reprap.org/mediawiki/index.php?title=P3Steel_Y_axis_assembly&oldid=135974"