ORE-Bot
Revision as of 19:54, 7 September 2010 by Sebastien Bailard (talk | contribs)
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: unknown
| Description | Small Self-Replicating CNC Router
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Contents
A few CAD Files
These CAD files only open in CAMBAM (it's free)
* carriage-top plate * carriage-bottom plate * z axis crossbar * left side of gantry * right side of gantry
Progress
The base is about 90% completed. The table needs several coats of varnish. The leadscrew isn't quite straight and will need some work.
The gantry needs holes for the bushings. 90% completed.
The carriage needs holes for the bushings. Also, the top and bottom plates need to be milled.
All 3 stepper motors need to be mounted.
BOM
Parts Base
* rods - qty:2, stainless steel, 0.750", 15", ends drilled and tapped for 1/4-20 screws * ACME leadscrew - steel, 0.500", 10 TPI * bearing * front bar - MDF, 0.750" * rear bar - MDF, 0.750" * table - MDF, 0.750"
Gantry
Y assembly
* cross bars - qty:2, aluminum, 0.5" x 1.25" x 12.6" * bushings - qty:4, bearing bronze, 0.875" OD, 0.755" ID * leadscrew nut - brass * side bars - qty:2, aluminum, 0.5" x 3" x 10" * rods - qty:2, stainless steel, 0.500", 12.600", ends drilled and tapped for 1/4-20 screws * ACME leadscrew - steel, 0.500", 10 TPI * bearing
Carriage (X axis assembly)
* side bars - qty:2, * bushings - qty:4, * leadscrew nut * top plate * bottom plate * rods * ACME leadscrew * bearing
Z Axis Assembly
* cross bars * bushings-qty:4 * leadscrew nut * Dremel tool mounting bar * lower Dremel tool mounting bracket * upper Dremel tool mounting bracket
May contain scaffolding.
This page may contain "scaffolding" - mediawiki text from the Example page that may not need to be there.
It may help to delete the parts that you don't need. (more details)
