Mini3dprintercontroller

Mini3dprintercontroller < English • العربية • български • català • česky • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk bokmål • polski • português • русский • Türkçe • українська • 中文（中国大陆）‎ • 中文（台灣）‎ • עברית •

  --   The mini3dprintercontroller Board is part of Mini3dprintercontroller Electronics

| | | | | << Next Version The mini3dprinter controller Previous Version >> mini3dprintercontroller Electronics Board Release status: developing

Description the mini3dprintercontroller Electronics License Creative Commons BY-NC-SA 3.0 Author romeo Based-on (reprap electronics) Categories electronics Development Models GitHub External Link (none) This is the central part of mini3dprinter Electronics. A board with all the features required to run a printer in a very small board 50 X 50 mm and also including a header to plug in driver boards for stepper motors control and lcd and micro sd cardreader too. This version have 2 heater for a struder and bed, also power for fan, 3 limits and 2 for temperature sensors like termistors and serial port for the USB-TTL adapter.