Metal Delta RepRap v1
Revision as of 20:45, 5 December 2013 by J.M.Pearce (talk | contribs) (Created page with "{{Development |name = Metal Delta RepRap v1 |status = working |image = Metalp.png |description = the MOST Metal Delta RepRap v1 is a derivative of the Rostock. |license = ...")
Metal Delta RepRap v1
Release status: working
Description | the MOST Metal Delta RepRap v1 is a derivative of the Rostock.
|
License | |
Author | [[User:Michigan Tech Open Sustainability Technology research group, primarily Jerry Anzalone]]
|
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
The Metal Delta RepRap v1 uses a upside down Rostock-like stage to move a substrate under a MIG welder. We have demonstrated steel printing using standard welding wire. For details see: Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders and Joshua M. Pearce, “Low-Cost Open-Source 3-D Metal Printing” IEEE Access (in press). DOI: 10.1109/ACCESS.2013.2293018 open access preprint
BOM, Build instructions, STL files, etc.
- How to build - the build is pretty easy by RepRap standards - less than a day when you have the full BOM. Total cost, including the welder is <$1200.