Mantis Electron 0.9
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Release status: experimental
| Description | Mantis Electron
|
| License | GPL v2
|
| Author | |
| Contributors | |
| Based-on | [[]]
|
| Categories | |
| CAD Models | No Git repo, yet. Please email [email protected] for a STEP file.
|
| External Link | (none)
|
The Mantis Electron is a precision RepRap printer. It's based on David Carr's ingenius Mantis 9.1 with gentle modifications towards even more stiffness, less play and sufficient build volume to print 100 x 100 mm sized PCBs.
(Expected) specifications:
- Build Volume 180 x 130 x 90 mm.
- Maximum feedrates: 1'500 mm/min (25 mm/s) on all three axes.
- Resolution: 0.00094 mm (0.94 μm) at 1/16 microstepping.
Contents
How to get it
TBD (there will be a shop and a shopping list for shopping in hardware stores)
Parts Lists
Commodities like wood screws or washers aren't included, yet.
Overall Parts List
| Name | Count | Designations | Raw Material / Vendors | Remarks | |||||
|---|---|---|---|---|---|---|---|---|---|
| Front Plate | 1 | Plywood 12 mm | |||||||
| Side Plate With Motor | 1 | Plywood 12 mm | |||||||
| Side Plate Without Motor | 1 | Plywood 12 mm | |||||||
| Back Plate | 1 | Plywood 12 mm | |||||||
| Z Bottom Plate | 1 | Plywood 12 mm | |||||||
| Z Top Plate | 1 | Plywood 12 mm | |||||||
| Carriage X | 1 | ||||||||
| Foot | 4 | ||||||||
| Biuld Platform | 1 | ||||||||
| Rod X | 2 | ||||||||
| Rod Y | 2 | ||||||||
| Rod Z | 2 | ||||||||
| Hohlkehlleiste | 12 | ||||||||
| LM10UU | 12 | ||||||||
| NEMA 17 Stepper Motor | 2 | ||||||||
| NEMA 14 Stepper Motor | 1 | ||||||||
| Motor Shaft Adapter | 3 | ||||||||
| Motor Shaft Coupler | 3 | ||||||||
| Spindle Rod X | 1 | ||||||||
| Spindle Rod Y | 1 | ||||||||
| Spindle Rod Z | 1 | ||||||||
| Movenut Block | 6 | ||||||||
| Igus SHT 1210 TRM10x3 | 6 | ||||||||
| Proxxon Micromot 50 | 1 | ||||||||
Electronics
For making the Mantis Electron actually move, you need a powered brain, of course. Any of the many RepRap electronics should do, like Generation 7 Electronics, RAMPS, Sanguinololu, etc.
Miscellaneous
TBD: spindles, mill bits, extruders, ...
Assembly Instructions
TBD
Assembly in Pictures
Click on the pictures to view them larger.
- Xxx.png
yyy.
- Xxx.jpeg
yyy.
Setup
TBD
Firmware
Customisations & Others
TBD
