Manga screen
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Release status: Working
| Description | Capacitive touch LCD
|
| License | |
| Author | |
| Contributors | |
| Based-on | [[]]
|
| Categories | |
| CAD Models | |
| External Link |
Introduction
Manga Screen is a high resolution LCD screen with a capacitive multitouch interface. Power and touch functionality is interfaced through USB and signal and EDID is transferred through HDMI. It was originaly devloped as an interface to go together with [Replicape] and BeagleBone Black, but has been shown to work with Raspberry Pi[2] and Arduino Tre [3]. For use with 3D-printers, Toggle is the preferred user interface, but it is still in it's infancy. Pronterface has also been shown to work, but is not ideal for such a small screen.
Specifications
| Parameter | Description |
| LCD type | 4.3" 480x800 16 bit color LCD |
| LCD interface | HDMI and USB |
| Control | Capacitive touch |
| Push button | None |
| Connection | HDMI Type D and USB Mini |
