Kid Mendel
Release status: under development
| Description | This is a Mendel derivative built by Jungseo Park with a aesthetically simple look, driven by high-speed leadscrews.
|
| License | GPL
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
The Kid Mendel is a printer designed by Thingiverse user JSPark, in South Korea. It is called the Kid Mendel for two reasons:
- The printer is an aesthetically simpler version of the Mendel or Prusa Mendel designs...
- Because of its simplicity, it is a good printer to use when introducing 3d printing to children.
Design
The printer follows in the footsteps of the Sells and Prusa Mendels; The extruder moves in X and Z, and the bed moves in Y. The X,Y,and Z axes are driven by leadscrew or threaded rod.There are files for the motor end of a belt-driven Y axis on JSPark's Thingiverse page, but no idler end.
RP Parts
| Quantity | STL file | Comments | Picture | Link |
|---|---|---|---|---|
| 1 | X Motor End |  |
||
| 1 | X Idler End |  |
||
| 1 | X Carriage |  |
||
| 1 | Y Motor End |  |
||
| 1 | Y Idler End |  |
||
| 2 | Leadscrew Backlash-Adjusting Nut | Two of these are held by an LM8UU Holder |  |
|
| 2 | Z Axis Motor Holder |  |
||
| 6 | Frame Vertex | Uses one type of vertex for the top and the bottom, instead of the classic footed/non-footed vertices |  |
|
| ?? | M8 Nut Cap Open Style | This number is unconfirmed |  |
|
| ~26 | M8 Nut Cap Closed Style | This number is unconfirmed | |
|
| 6 | Printed LM8UU | This number is unconfirmed; it is recommended that you print these in PLA, and print spares for when they wear out |  |
|
| 7 | LM8UU Holder | Use Ver. 2;This number is unconfirmed |  |
