K'nexStrap
Release status: concept
| Description | A k'nex RepStrap development
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | Development
|
| CAD Models | |
| External Link |
Contents
K'nexStrap, a K'nex Repstrap
I always wanted to build a RepRap Prusa, but I couldn't get my hands on parts (yet). I tried something out in K'nex (see below), to print out Prusa's parts. I almost immediately broke up the whole thing, because it was to heavy for the motors. As souvenir on those build times, see next video, who's demonstrating the X and Y axes. <videoflash type="youtube">Gg21KHjvsHo</videoflash>
Good to know : the standard hole in the k'nex pieces fit m6 rod
Inspiration
History
Concept 1
I started building a Y axis, with yellow half circles to form a path. I used 3 small default K'nex wheels, one without rubber, to form a big wheel. Then attached a motor, and placed it over the yellow parts:
Afterwards I put some yellow halfs at 45°, to get the X axis running. I just placed a non-rubbered small wheel on top of it, and mirrored it to the other side. Watch the image below, I can't explain it properly
Volume
Net yet known, in development
Print volume
X: 170mm
Y: 170mm
Z: 110mm
