Huxley Seedling

From RepRap
Revision as of 01:36, 25 October 2010 by Buback (talk | contribs)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
Seedling Basic Repstrap-Huxley Development

Release status: experimental

A basic simple 3D printer based on Huxley to print all the parts needed to build Huxley or Mendel uses only materials & components that anyone can make or buy. Low cost low tech.
CAD Models
External Link

Note: Huxley is optimized to be printed. 


For the last two years I have been building various RepStrap versions of Darwin, Mendel trying to devise simple ways to build these printed self replicating machines. Huxley Seedling is based on all of the experience gained building the previous RepStraps. I built two of these RepStraps in February 2010 This will be the final rendition/ re-design.

This is the very First posting of all the components and drawings used to build a Huxley Seedling machine.

Note: Sebastien I have not blogged this design.. ;-) Nophead saw some of the early parts in February when we meet up. 


Made the drawings for new Worm Extruder Drive MKIII.

Made the component parts for Worm Extruder Drive MKIII.

To do list

Build the Worm Extruder Drive MKIII.

Test the Worm Extruder Drive MKIII.

Learning to drive this wiki!

Lots of drawings.

Then re-making every part from those drawings.

Documenting each stage

Photographing the build process.

Listing raw materials tools etc.

Spell checking every thing.

Working Notes




Worm Extruder Drive MKIII Drawings go here



See Also