Huxley-eg
Release status: concept
| Description | |
| License | unknown
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link | []
|
Just an idea (not particularly for the huxley, but when choosing an order of scale I found it sufficient) :
for less shaking at high-speed put the extruder axis perpendicular to the triangular frame (for more resistance and thus maybe allowing more speed ?). While the mass of the bed rest at the base.
But that also make a prism-shaped print volume... (on the other side, we rarely print a real cube)
Other intentions :
- belt-driven Z-axis (a little motor in the center on the top, serve also to tighten the belt)
- 2 sliding rails for the platform, quite cheap, like those for a drawer (idea of a friend, Adil)
- vertical extruder axis with two linear bearings
- one or more bowden extruders
- 15 rods and less than 20 printed parts to connect the rods
Maybe it's not a good idea, but I had to add share it here :P
