Hot End Comparison
Revision as of 21:35, 14 March 2014 by Thejollygrimreaper (talk | contribs)
Hotend designers are encouraged to add their hotends in the table below, as well as start a wiki page where lists of suppliers can be put.
- this table is for hotends only, it is not a supplier list, add your supplier list to the wiki page associated with the hotend
| Hotend name | Designer | Mount type | Direct/Bowden | Build Material | Filament sizes | Nozzle Sizes | license | Wikipage/Link | Reviews & Additional notes |
|---|---|---|---|---|---|---|---|---|---|
| E3D - V5 | Sanjay | Modified Groovemount | Both | All Metal | 1.75/3mm | 0.25/0.3/0.35/0.4/0.6/0.8mm | CC BY-NC-SA 3.0 | E3d_hotend,E3D Online | - |
| Aluhotend V5B | Thejollygrimreaper | 4.6mm grovemount (same as jhead) | direct (bowden with printed adapter) | stainless/aluminium/brass/ptfe liner | 1.75mm | 0.3/0.5mm | NC (to be revised) | Wikipage ,Webstore | - |
| J-Head Mk V | User:Reifsnyderb | Groove Mount | Direct; Bowden with Adapter | PEEK/PTFE/Metal | 1.75/3mm | 0.35/0.45/0.5mm | GPL | J Head Nozzle, hotends.com | - |
| sample entry | sample | sample | sample | sample | sample | sample | sample | sample | sample |
