Holliger
Revision as of 07:15, 7 May 2014 by Jonathan Raines (talk | contribs)
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Holliger Documentation
Release status: First prototype
[[image:|center|190px]]
| Description | A Huxley variant that can represent a much higher proportion of itself and is stiff enough to support limited milling.
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link | []
|
Contents
Introduction
Specifications
| ' | Single Sheet Frame |
| Plastic Parts (exc. Extruder) | 26 |
| Non Printed Parts approx. | 337 |
| Cost | $300-1000? |
| Controller Electronics | Almost all RepRap |
| Printing Size | 200 x 200 x 200 |
| Motors | 5 x NEMA 17 Stepper |
| Frame Material | 6mm Aluminium, Wood |
| Frame Manufacture | Laser Cutter, CNC, Water Jet |
| Pro | Easy assembly |
| Con | Specialised Tools |
Main improvements
History
Printed Parts
Frame type
Videos
TODO add more solutions
