Hacks to the RepRap Extruder Controller v2.2

From RepRap
Revision as of 09:13, 3 October 2009 by Adrianbowyer (talk | contribs) (K-type thermocouple on the extruder controller)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Thermocouple input


This allows you to use a K-type thermocouple for temperature sensing as opposed to the standard thermistor. It uses the MAX6675 chip, and is easily put together on a small piece of stripboard.