Drive-gear
Drive-gears to be used in direct drive and some other extruders (like the Adrian's_Geared_Extruder).
| Model | From | Size (OD-lenght) | Bore | Approximate Cost | Additional notes |
|---|---|---|---|---|---|
| Makerbot MK7 | US | ? mm | 5 mm | 12 $ | - |
| RepRapWorld mk7-like | Netherlands | 12 - 10 mm | 5 mm | 8 € | "mk7 compatible" |
| Mini-hyena | Hungary | several | 5 or 8 mm | 12 $ | made by Arcol ! |
| - | - | - | - | - | - |
| Brass insert | |||||
| Conrad.com Conrad-uk |
EU UK |
? mm | M4 | 3 € 4 £ |
- |
| Maritime-models | UK | ? mm | many | 1,80 £ | - |
| Reprapworld | Netherlands | ? mm | M4 | 4 € | - |
There is also Blddk who make some drive-gear similar to the makerbot-mk7, you may ask him on the IRC.
