BuildingAStripboardExtruderController
HOWTO: Building a stripboard Extruder Controller
Pinouts
Pinouts:
- RA0 is thermistor input
- RB0 is heater element controller
- RB1/2 are network comms (see Stepper module for details)
- RB3 is motor PWM output
- RB4/5 are motor direction controls (one is the inverse of the other)
- RB6 is material-empty sensor input
- RB7 is the chopper wheel input (optional)
-- Main.SimonMcAuliffe - 03 Feb 2006