Budaschnozzle
Revision as of 21:01, 7 September 2011 by Steven-AlephObjects (talk | contribs)
Release status: Working
| Description | Truly free/libre hot end
|
| License | GPLv3
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Contents
Intro
- The BudaSchnozzle is a free/libre hot end.
- Inspired by the Arcol.hu Hot-end
Features
- Aluminum Block Resistor Hotend
- Easily assembled and torn down with no glue or ceramic
- Wire Strain Relief
- Includes machined aluminum and steel parts, and laser cut wooden parts
Specs
- Size: (H,W,L) 55mm, 40mm, 40mm
- Aluminum block resistor
- Machined aluminum heat block: 18.4mm x 25mm x 8.3mm
- Machined aluminum nozzle
- Thermistor temperature reading: Honeywell 135-104LAG-J01
- Resistor heating element: Vishay RWM06226R80JA15E1
- Aluminum and copper heatsink
- PEEK GF30 insulator
- PTFE inner sleeve
- Laser cut hard wood plates
- Machined stainless steel back-up plate
Special Notes
- A custom created thermal table has been created for the Honeywell 135-104LAG-J01 thermistor for use with the Buddhaschnozzle. The thermal table will be added to Sprinter firmware shortly [hint, hint]
Source
| FILE NAME | TYPE | DESCRIPTION | DOWNLOAD |
|---|---|---|---|
| heater block.pdf | 2D CAD drawing | CAD drawing for the heater block | Heater block |
| nozzle.pdf | 2D CAD drawing | CAD drawing for the nozzle | Nozzle |
| peek insulator.pdf | 2D CAD drawing | CAD drawing for the PEEK insulator | PEEK insulator |
| upper plate.pdf | 2D CAD drawing | CAD drawing for the Upper Plate | Upper plate |
| backup plate.pdf | 2D CAD drawing | CAD drawing for the Backup Plate | Backup plate |
| copper heatsink.pdf | 2D CAD drawing | CAD drawing for the Copper heatsink | Copper heatsink |
| budaschnozzle_mount.stl | 3D CAD model | 3D CAD model for the Budaschnozzle mount | Buddhaschnozzle mount |
