3DPrintMi
Revision as of 10:40, 30 May 2013 by Gyronictonic (talk | contribs)
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: experimental
| Description | Open Frame Reprap
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Introduction
A Reprap printer designed from the ground up, drawing influence from the Printrbot/Wallace, Prusa Mendel, Lulzbot TK-0, etc.
Specifications
- Printed Parts: 31
- Non-Printed Parts: 279 - 281
- Material Cost:
- Printed Parts = ?
- Vitamins = $105 - $135
- Electronics = $240 - $320
- Cost: $350 - $450
- Printing Size: 152mm x 152mm x 200mm (6" x 6" x 8")
- Precision: ???
- Accuracy: 0.15mm (current layer height tested)
- Speed: 50mm/s perimeter, 120mm/s infill
Features
- In compliance with Vertical X Axis Standard, compatible with Mendel style X gantry
- Fully printed, Y carriage platform, direct mount for build plate
- Able to reconfigure extruder mount for Wade Extruder/Bowden or Direct Drive (QU-BD)
- Fully parametric
- Designed in metric units
Additional Info
Estimated assembly time = 2 - 3 hours (excluding electronic/board assembly) Estimated print time to a fully printed set = At least 30 hours Estimated plastic usage to a fully printed set = 380 cc Power requirement = 80W to 100W (Hotend @ 240C, Hotbed @ 95C)
