Aluminatus TrinityOne Software Electronics
Aluminatus TrinityOne Documentation
Contents
Software
Essential
- Please add information here
Helpful
- Increase the PID_FUNCTIONAL_RANGE in the config.h to 20.
- The default for the value is 10. With a 24 V system, 10 degrees for the hotend is about 1 second when initially heating up so it would overshoot a lot.
- Make sure your PID is tuned.
- Value I like: Send M301 P12.5 I0.18 D12.0 to update your hotend PID settings. Send M304 P125.0 I0.3 D300.0 to update your Bed PID settings. Now send M500 to save the PID settings to EEPROM.
Other
- Please add information here
Hardware
Version 1.0.0
Essential
- Move RAMPS fan to the side
Helpful
- Print ABS Bed corners
Other
- Please add information here
---
Version 1.0.1
Essential
- Please add information here
Helpful
- Please add information here
Other
- Please add information here
