XtruBot
Revision as of 09:55, 20 March 2012 by Scott.winroth (talk | contribs)
XtruBot
Release status: Experimental
Description | Open Source RepRap 3D Printer
|
License | |
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | Coming Soon
|
External Link | http://www.xtrubot.com/ ****Not active yet****
|
Project Goals
- To develop an open source RepRap 3D printer capabable of competing for the Gada Prize.
- To increase the body of knowledge in the area of 3D printer technology through open source collaboration.
- To reduce the barriers to personal 3D printer ownership by:
- Reducing printer cost.
- Simplifying printer assembly.
- Increasing printer availability.
- To improve 3D printer performance by:
- Increasing printer reliability and repeatability.
- Improving the build quality of 3D printed parts.
- Adding novel features to adapt 3D printers for new uses.
Interim Gada Prize Criteria (official rules)
- All entries must be open source hardware projects, including all designs, schematics, source code, CAD files, etc.
- Award amount of up $20,000
- Award date of 31 DEC 2012
The winner of this Gada prize will be the individual (or group) who can make a RepRap that meets the following specifications:
- Ability to print at least three different materials, including one that is usefully electrically conductive.
- Ability to print electronic circuit boards.
- Print beds† must be of a material which may be reused with minimal refurbishment for at least 20 print cycles.
- Maintain a total materials and parts cost under $200 and that 90% of the volume of the printer parts be printed.††
- Demonstrate a build volume of the printer above 300x300x100mm in order to ensure that items of daily utility can be printed.
- The capacity to print a full set of parts for a complete replica of itself within 10 days unattended save for clearing no more than one printer head jam.
- Ability to print autonomously without a PC attached.
- Uses no more than 60 watts of electrical power.
†Print beds are flat surfaces onto which parts are printed
††Print beds are not necessarily a permanent part of the printer and are not figured into either the cost or the volume requirements of a printer
Project Log
20 MAR 2012
- Created XtruBot wiki site on reprap.org
- Registered Team XtruBot for Gada competition