Reprappable-inkjet
Revision as of 18:03, 14 December 2010 by Adrianbowyer (talk | contribs)
Reprappable Inkjet
Release status: experimental
Description | An inkjet head that can be completely made in a RepRap machine
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
This is an inkjet head that is completely makable in a RepRap machine. It was inspired by Johnrpm's Scratchbuilt_Piezo_Printhead.
It has only three reprapped parts. The other parts are standard easily-obtainable items. There is no machining involved in making it - the only tools needed are scissors, a scalpel or razor blade, a hammer, a short piece of 3 mm steel rod to use as a punch, and a glue gun.
Bill of Materials
<videoflash type="vimeo">17782515</videoflash>