All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 20:59, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 3.jpg (Braided cables: no tangles of loose wires!)
- 20:58, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 2.jpg (Braided cables (various styles) of an ATX PSU.)
- 20:58, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 1.jpg (Braided cables of an ATX PSU.)
- 16:55, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU switch 1.jpg (The back of the ATX PSU with a proper O/Off switch.)
- 16:46, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cables 1.jpg (The cables are not sleeved, and 200-240V AC input only.)
- 15:14, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU box back 1.jpg (The back of the box listing the technical specifications and features for this ATX PSU.)
- 15:07, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU out of box 1.jpg (Just the ATX PSU out of its box.)
- 14:56, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU label 1.jpg (Almost every ATX PSU has a label on the side with its power ratings.)
- 14:44, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU open box 1.jpg (Box contents: the PSU in bubble wrap, power cable, small plastic bag with four screws and... no manual!)
- 14:30, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU in the box 1.jpg (An ATX PSU for my RepRap project, in its box, still with the shrink wrap.)
- 07:43, 13 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting6a.jpg (Yellow requires two coats, as the first coat by itself does not result in uniform coverage.)
- 07:34, 13 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting5b.jpg (After sanding the steel frame parts, rub with a sponge in warm water with detergent and rinse abundantly, then dry with a rag.)
- 21:21, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:M3 thumbwls.jpg (Low profile bed leveling M3 thumbwheels for P3Steel)
- 20:47, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-electronics1b.jpg (Arduino + RAMPS 1.4 combination as used in the P3Steel.)
- 20:12, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-1a.jpg (P3Steel and Arduino + RAMPS 1.4 electronics and wiring)
- 19:06, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting4a.jpg
- 18:59, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting3a.jpg (Inexpensive universal acrylic paint used to paint the P3Steel frame parts.)
- 18:51, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting2a.jpg (The P3Steel laser-cut parts need to be sanded before painting.)
- 18:38, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting1a.jpg (Shows a barb on a laser-cut steel part for the P3Steel.)
- 18:00, 12 October 2014 User account AndrewBCN (talk | contribs) was created