FoldaRap1.0 y-carriage

>> Back to FoldaRap_Build_Manual#Y-carriage

It's basically the same as the lasercut version.

Tips : if the bearing mount are too loose, you can add a little drop of glue or a very small amount of blue tack in the bearing grooves.

<videoflash>m6JDE4KDay4|320|240</videoflash>

<videoflash>CvJv414KFWM|320|240</videoflash>

File:FoldaRap1.1_lasercut-y-carriage_02.jpg