RUG/Pennsylvania/State College/Electronics/RAMPS
Current Firmware
https://github.com/joshpj/Marlin
Old Price Info
Since the RAMPS electronics seems to be one of the best bets for the alternate electronics on the PRUSA RepRaps this is a compiled list of where to purchase and the cost. Some of these are located in America and other companies are International.
The company ULTIMACHINE seems to be the best bet for cheap electronics in the US. also purchasing the stepper controllers from them also seems like a good idea as they come with heatsinks for only $1. I would recommend purchasing the unassembled kit
- http://ultimachine.com/content/ramps-pre-assembled-kit-complete
- $200 everything 4 steppers, and end stops
- http://ultimachine.com/content/ramps-pre-assembled-kit
- $85 the board fully assembled
- http://ultimachine.com/content/ramps-diy-kit-complete
- $162 unassembled kit but has pololu and end stops
- http://ultimachine.com/content/ramps-diy-kit
- $50 just the board and electronics
- http://ultimachine.com/ramps
- $10 this is just the ramps board no electronics
- http://reprapsource.com/shop/show/6603
- 49.9 Euros built
- http://xyzprinters.com/23-ramps
- 7.97 Euros for the Board
- 30.67 Euros for Electronics
- 72.26 Euros for RAMPS (everything needs assembled)
- 33.60 Euros for RAMPS board (also un-assembled)