Metamaquina 3D/Instruções de montagem/Extrusor

From RepRap

Revision as of 20:02, 12 November 2012 by Tecepe (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Montagem do bico extrusor
2 Montagem do corpo do extrusor
- 2.1 Components
- 2.2 Instructions
3 Anexando o bico extrusor ao corpo do extrusor

Montagem do bico extrusor

Components

1x brass heater block
1x brass nozzle
1x PEEK support block
1x PTFE insulator
1x Thermistor
1x Heating resistor
1x PTFE tape
1x Silicone sealant

Instructions

Wiring the Hot End

Montagem do corpo do extrusor

Components

Instructions

Anexando o bico extrusor ao corpo do extrusor

Retrieved from "https://reprap.org/mediawiki/index.php?title=Metamaquina_3D/Instruções_de_montagem/Extrusor&oldid=71418"