Full Rod Cut List
Revision as of 17:43, 28 February 2012 by StephenThor (talk | contribs)
Each open hybrid mendel Rep Rap will need a full set of threaded and smooth rods for the building process.
Rod | Part Name | Quantity | Length (in.) | Rod Type |
---|---|---|---|---|
A | X-Axis rail | 2 | 18 | smooth |
B | Z-Axis rail | 2 | 13 | smooth |
C | Triangular frame | 6 | 14.5 | threaded |
D | Short X cross-bars | 4 | 11.5 | threaded |
E | Long X cross-bars | 3 | 17.5 | threaded |
F | Z-drive rods | 2 | 10 | threaded |
G | Y-plate support | 1 | 4.5 | threaded |
H | Spool base | 2 | 4 | threaded |
J | Spool arm | 2 | 9 | threaded |
K | Y-Axis rail | 2 | 16.5 | smooth |
A recommended cutting plan is shown below. This plan uses 1 meter stock rods from a hardware store.