BIQ Opto Endstop
Revision as of 10:00, 27 November 2011 by Glenn (talk | contribs) (catchg Category:Electronics development)
BIQ Opto Endstop
Release status: experimental
Description | Revision 0.1
|
License | CC BY-NC-SA 3.0
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | Eagle
|
External Link |
Introduction
A small low cost RepRap compatible Opto Endstop using an Opto End stop with a 0.5mm beam slightly smaller than the HB102 beam with of 0.8mm. The opening of the interrupter is 5mm allowing for a 3mm black perspex interrupter tag designed for use on Huxley Seedling but can be used on All RepRaps.
To be updated with files and pictures once the first PCBs arrive.