K'nexStrap
Release status: concept
[[image:|center|190px]]
| Description | A k'nex RepStrap development
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | Development
|
| CAD Models | |
| External Link |
Contents
K'nexStrap, a K'nex Repstrap
I always wanted to build a RepRap Prusa, but I couldn't get my hands on parts (yet). I tried something out in K'nex (see below), to print out Prusa's parts. I almost immediately broke up the whole thing, because it was to heavy for the motors. As souvenir on those build times, see next video <videoflash type="youtube">Gg21KHjvsHo</videoflash>
Good to know : the standard hole in the k'nex pieces fit m6 rod (that's also why I wanted to make a sort of huxley'k'nex)
Inspiration
First thought
I started building a Y axis, with yellow half circles to form a path. I used 3 small wheels, one without rubber, to form a big wheel. Then attached a motor, and placed it over the yellow parts: File:Http://img62.imageshack.us/img62/7003/knexwheel.png
Volume
Net yet known
Print volume (theoric)
X:
Y:
Z:
