User:Darque/General/UsefulLinks
Regular Visits
http://reprap.org/wiki/Prusa_i3_Rework_Bill_of_materials
http://reprap.org/wiki/Wiki_Administration
Machines
http://reprap.org/wiki/Prusa_i3_Hephestos
http://reprap.org/wiki/Adrians_Prusa_Notes
Design
Wiring
RAMPS1.4#Shield_Assembly
A4988_vs_DRV8825_Chinese_Stepper_Driver_Boards
Software
http://reprap.org/wiki/RepRap_software_tweaking_manual
http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
Commissioning
http://reprap.org/wiki/Testing_RepRap_Electronics
http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
http://prusaprinters.org/calculator/
https://www.matterhackers.com/news/3d-printer-firmware-settings-stepper-motor-configuration
http://airtripper.com/1799/marlin-firmware-home-offset-guide-using-g-code-m206/
Re-Read
http://reprap.org/wiki/Art_of_illusion
http://reprap.org/wiki/Separate_page_on_the_question
http://reprap.org/wiki/Category:Development
LInks
www.appropedia.org/Welcome_to_Appropedia
Continuous Liquid Interface Production technology (CLIP)
http://carbon3d.com
22g (Thermister)
18g (HeatBed Element)