PrintMATE 3D
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Template:PrintMATE 3D - Lasercut Optimized Prusa i3
Release status: working
[[image:File:Beispiel.jpg|center|190px]]
Description | Prusa Mendel Iteration 3, optimized for lasercut.
|
License | CC BY-NC-SA
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
The machine and the assembly instructions are licensing by CC. Files are available here :
http://printMATE3D.com/download
printMATE 3D presentation
The Prusa Mendel i3 is the third version of the open source 3D printer Prusa Mendel. Our version is based on an aluminium frame cut by water jet cutter and threaded rods. Axis motion are made on linear bearings, belts and pulleys or threaded rods and NEMA 17 motors.
Improvements
- Extruder upgrade: Magma Hotend (by Trinity Lab) support.
- New cooling fan duct for Magma Hotend.
- Y Idler with a tensioner system.
- X End Idler with endstop holder.
- Upgrade X End Idler in order to support 624 bearing.
- Y Motor with endstop holder.
- Addition of Z endstop Holder in situ.
Sources
- http://www.thingiverse.com/thing:39889
- Wade extruder
Help and support
You can contact us with the following websites : http://www.printMATE3D.com