FoldaRap Y-motor AzteegX1 240W

From RepRap
Revision as of 20:29, 9 June 2013 by Emmanuel (talk | contribs)
Jump to: navigation, search

>>Back to FoldaRap_Build_Manual#Y-motor

The 240W power supply is a TXH240 [1]. It was replaced by a 120W power supply after we realized the first one was a little overkill (and costly, the 120W is ten times cheaper).


  • Power supply to male plug : 1 green wire 18WG of 35cm, one end with ferule, the other end just stripped
  • Switch to power supply : 1 red and 1 black wire 18AWG of 35cm, one end with ferule, the other end just stripped

<videoflash>BiiBkZKw1og|320|240</videoflash>

<videoflash>_tXWGjJq0zM|320|240</videoflash>

  • Bolt the PSU on the plate, with a washer between the psu and the plate
Retrieved from "https://reprap.org/mediawiki/index.php?title=FoldaRap_Y-motor_AzteegX1_240W&oldid=94761"