Alubot
Revision as of 06:42, 11 May 2013 by Robinarvidsson (talk | contribs)
Alubot
Release status: concept
Description | Alubot is one of the easiest to build Reprap 3D printer, and uses Aluminum t-slot as frame.
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | none
|
CAD Models | none
|
External Link | none
|
ALUBOT
Info
Alubot aims at beeing one of the easiest 3D printers to build at a low cost, and uses the concept of Reprap to do so. Alubot consist of 7 equally long t-slot aluminium extrusions, 10 90degrees brackets, 4 smoothrods, 2 threaded rods, 5 motors and more. Alubot is easy to scale, by adjusting the length of the aluminium extrusions, smooth rods and the threaded rods. but i would still advice to build the printer for a printarea of 20x20cm for a first time builder.
Parts
Updates shortly
RP Parts
The following is a list of what needs to be printed:
Quantity | STL file | Comments | Picture |
---|---|---|---|
2 | X-AXIS | ||
1 | X-Endstop_Motor.stl | ||
1 | X-Endstop_bearing.stl | ||
10 | Y-AXIS | ||
1 | Y_BearingHolder.stl | ||
1 | Y-Motor_holder.stl | ||
4 | Y-LM8UU_Holder.stl | ||
4 | Y-8mm-Smootrod_Holder.stl | ||
2 | Z-AXIS | ||
2 | Z-motor_holder.stl |
Vitamins
Updates shortly
Electronics
Updates shortly