Generation 3 Electronics/Tech Zone Remix/How to
I'm writing as a manual to the "TechZone Electronics Kit"... Please feel free to edit any errors or discrepancies... feel free to add to this page...
This page (as of now) is purposely not linked inside the wiki... (the ground-work needs to be laid-out first and pics need to be uploaded... so here we go...
Contents
Befor We Begin... Things You Should Know...
text
The USB/TTL Board
text (here we need a pic of the board pointing out the ground pin...)
The Main Motherboard
text (here we need a pic of the mother board labeling the pins... by function
Connecting The Motherboard to the USB/TTL board to Load Firmware
Making the Connection
Making Your Cables (Insulation Displacement Connectors)
text
The Jumper Technique...
text
The Stepper Board
text
Making the Connection
Making a 10pin IDC Cable
text
Make 2 out of an IDE cable
text
Make a breakout to use a Stepper Board to drive your stepper extruder motor... (optional Stepper board needed)
text
Making the Connection
The Opto End-stop
text
The Extruder Board
text