Smartrap Build Manual
Revision as of 18:50, 11 July 2014 by Smartfriendz (talk | contribs)
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Smartrap Mini | How to Get Smartrap | Smartrap Build Manual | How to Use Smartrap | Smartrap Improvements
Welcome to the official document of the Smartrap's assembly.
Each step of building should take around one minute.
Contents
Tools you need:
- Small screwdriver plate for M3
- Bigger screwdriver for M6
- Allen key 1mm
Printed parts
![]() |
plate_base | ![]() |
plate_x | ![]() |
plate_y | ||
![]() |
bottom | ![]() |
endx_huxley | ![]() |
endx_back | ||
![]() |
bottom | ![]() |
endx_huxley | ![]() |
endx_back | ||
![]() |
bottom | ![]() |
endx_huxley | ![]() |
endx_back |
Non printed parts
Pre-assemble the head
![]() |
1 | ![]() |
2 | ![]() |
3 |
![]() |
4 | ![]() |
5 | ![]() |
6 |
![]() |
7 | ![]() |
8 | ![]() |
9 |
![]() |
10 |
Bottom / base
![]() |
1 | ![]() |
2 | ![]() |
3 |
![]() |
4 | ![]() |
5 | ![]() |
6 |
![]() |
7 | ![]() |
8 | ![]() |
9 |