Hexagon
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Release status: working
Introduction
The Hexagon hotend became available in 2014, can extrude PLA, ABS, Nylon and more. Can by used up to 300°C. Must be actively cooled with a fan that is always on (not connected to fan output, but directly to 5/12V).
The Hexagon hotend is sold by ReprapDiscount as a kit. The kit includes a 12V/30w heater, prewired thermistor, an aluminium mounting plate, 40 & 30mm fans, 0.4mm nozzle as well as tools for mounting. The hotend has the typical grove mount that you can find on many extruders. The thermistor is a EPCOS B57560G104F NTC (type 5 in Marlin).