All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 04:21, 25 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU block 1.jpg (12 position terminal block strip and correct size screwdriver.)
- 01:28, 25 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU gauge 2.jpg (20AWG wire.)
- 01:28, 25 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU gauge 1.jpg (18AWG wire.)
- 20:54, 24 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting sense 2.jpg (The 3.3V_Sense lead and a 3.3V lead soldered together and insulated with heatshrink tubing.)
- 20:45, 24 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting sense 1.jpg (The 3.3V_Sense lead and a 3.3V lead which we are going to solder together.)
- 05:07, 24 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel painted parts 1.jpg (After many days, all the P3Steel frame parts are painted. I gave up on yellow and used dark blue for some parts.)
- 21:29, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU innards 4.jpg (More cable to cut or keep!)
- 21:20, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU innards 2.jpg (Another view of the innards of our ATX PSU, with the PFC coil connector and the fan connector disconnected.)
- 21:00, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU innards 3.jpg (Shows some of the wires we are going to cut.)
- 20:47, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting 4.jpg (We also cut away all the cables to the main motherboard connector.)
- 17:02, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting 3.jpg (We keep the cabling we cut out for later.)
- 16:54, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting 2.jpg (We also cut away the motherboard 12V CPU connector.)
- 16:41, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cutting 1.jpg (Cables should be cut right at the PCB level.)
- 13:04, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU tools 1.jpg (Pliers and screwdrivers generally needed to modify ax ATX PSU.)
- 10:00, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU pry open 1.jpg (Gently push apart the two case halves with a flat screwdriver.)
- 09:54, 23 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU screws removed 1.jpg (We now have removed the four screws, but the case still won't come apart!)
- 16:39, 22 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU innards 1.jpg (The guts of our ATX PSU.)
- 16:14, 22 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU screws 1.jpg (The screws holding together the ATX PSU case.)
- 08:06, 22 October 2014 AndrewBCN (talk | contribs) uploaded File:LEDstripPSU 1.jpg (An example of a cheap LED strip PSU - not recommended for RepRap use.)
- 23:53, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU ready 1.jpg (Our ATX PSU is now ready to be connected to our RepRap electronics.)
- 22:14, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU test 1.jpg (No load test of an ATX PSU.)
- 20:59, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 3.jpg (Braided cables: no tangles of loose wires!)
- 20:58, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 2.jpg (Braided cables (various styles) of an ATX PSU.)
- 20:58, 21 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU braids 1.jpg (Braided cables of an ATX PSU.)
- 16:55, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU switch 1.jpg (The back of the ATX PSU with a proper O/Off switch.)
- 16:46, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU cables 1.jpg (The cables are not sleeved, and 200-240V AC input only.)
- 15:14, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU box back 1.jpg (The back of the box listing the technical specifications and features for this ATX PSU.)
- 15:07, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU out of box 1.jpg (Just the ATX PSU out of its box.)
- 14:56, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU label 1.jpg (Almost every ATX PSU has a label on the side with its power ratings.)
- 14:44, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU open box 1.jpg (Box contents: the PSU in bubble wrap, power cable, small plastic bag with four screws and... no manual!)
- 14:30, 20 October 2014 AndrewBCN (talk | contribs) uploaded File:ATX PSU in the box 1.jpg (An ATX PSU for my RepRap project, in its box, still with the shrink wrap.)
- 07:43, 13 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting6a.jpg (Yellow requires two coats, as the first coat by itself does not result in uniform coverage.)
- 07:34, 13 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting5b.jpg (After sanding the steel frame parts, rub with a sponge in warm water with detergent and rinse abundantly, then dry with a rag.)
- 21:21, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:M3 thumbwls.jpg (Low profile bed leveling M3 thumbwheels for P3Steel)
- 20:47, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-electronics1b.jpg (Arduino + RAMPS 1.4 combination as used in the P3Steel.)
- 20:12, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-1a.jpg (P3Steel and Arduino + RAMPS 1.4 electronics and wiring)
- 19:06, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting4a.jpg
- 18:59, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting3a.jpg (Inexpensive universal acrylic paint used to paint the P3Steel frame parts.)
- 18:51, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting2a.jpg (The P3Steel laser-cut parts need to be sanded before painting.)
- 18:38, 12 October 2014 AndrewBCN (talk | contribs) uploaded File:P3Steel-painting1a.jpg (Shows a barb on a laser-cut steel part for the P3Steel.)
- 18:00, 12 October 2014 User account AndrewBCN (talk | contribs) was created