| Color:
|
Green, Red and Gold
|
| Extruder:
|
Unknown
|
| Temperature:
|
Unknown
|
|
This page is for information about the PSU Unit Delta, which is currently being built. This unit will follow the design of the Rostock_mini. All of the printable parts are printed in PLA and assembled.
This printer is being constructed by Nathan Myer.
Log
| Date
|
Modification / Problem
|
| 3/11/14
|
The first mini Rostock parts were printed.
|
| 3/25/14
|
The Rostock mini project was changed to a full sized Rostock. It will actually be about 12 inches higher than a standard Rostock.
|
Important Information
| Operating Specifications
|
| Name
|
Status
|
Design
|
Electronics
|
Firmware
|
Extruder
|
Temperature
|
Comments
|
Purple 
|
operational
|
Ohm
|
Ramps
|
Marlin
|
|
190C
|
Extruder motor overheats on longer prints
|
Builders
