Libro

From RepRap
Revision as of 23:02, 4 November 2015 by PCCLD (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
Libro

Release status: Concept

Libro LinearDrive.JPG
Description
A delta style reprap printer designed to be built at a public library.
License
GPL
Author
Contributors
Based-on
Categories
CAD Models
External Link



Libro is a RepRap 3D printer designed to be created at public library makerspaces. Design emphasis is placed on 'foolproof' ease of assembly, minimal tool use, and short overall component print time. This development was originally begun as a makerspace program for the Pueblo City-County Library District by David Hartkop, PCCLD Technology Trainer.

PART NAME FILE NAME PRINT TIME (min) FILAMENT (g) # TO PRINT
Linear Bearings 150901_repraplibro_linearbearings1_4up 120 35 3
Carriage 150908_repraplibro_carriage 80 30 3
Extruder Hub 150908_repraplibro_extruderhub 85 30 1
Idler End 150908_repraplibro_idlerend 40 14 3
Motor End 150908_repraplibro_motorend_2up 81 27 3
Pulley Set 150908_repraplibro_pulleysset 6 3 3
Magnet Mount 150914_repraplibro_magnetmount8_4up 44 14 3
Small Spool Holder 150922_repraplibro_smspoolholder01 35 13 1
Standard Spool Holder 150922_repraplibro_spoolholder03 31 11 1
Magnet Angle Mounts 150926_repraplibro_magangmts_2up 20 7 3
Bowden Extruder 151013_repraplibro_bowdenextruder 128 43 1
Extruder Gears 151009_repraplibro_extrudergears 41 15 1

Download the build files for the RepRap Libro here: http://www.thingiverse.com/thing:1063222


You can download the configured Marlin firmware for your RepRap Libro Here on Github: https://github.com/qbit/RepRapLibro


<TR> <TD WIDTH=86 HEIGHT=16 ALIGN=CENTER BGCOLOR="#060808">Part No.</TD> <TD WIDTH=114 ALIGN=RIGHT BGCOLOR="#060808">Part</TD> <TD WIDTH=323 ALIGN=LEFT BGCOLOR="#060808">Description (enter as web search term!)</TD> <TD WIDTH=86 ALIGN=CENTER BGCOLOR="#060808">Category</TD> <TD WIDTH=86 ALIGN=CENTER BGCOLOR="#060808">For What steps:</TD> <TD WIDTH=86 ALIGN=CENTER BGCOLOR="#060808">Step #</TD> <TD WIDTH=86 ALIGN=CENTER BGCOLOR="#060808">Quantity</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="1" SDNUM="1033;">1</TD> <TD ALIGN=RIGHT BGCOLOR="#D6DEFF">Super glue</TD> <TD ALIGN=LEFT BGCOLOR="#D6DEFF">standard fast drying cyanoacrylate super glue</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Adhesives </TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Connector rod</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Step 2.4</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="2" SDNUM="1033;">2</TD> <TD ALIGN=RIGHT BGCOLOR="#D6DEFF">2-part epoxy glue</TD> <TD ALIGN=LEFT BGCOLOR="#D6DEFF">tubes of J-B Weld type heavy duty hard-setting 2 part epoxy</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Adhesives </TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Connector rod</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Step 2.4</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="3" SDNUM="1033;">3</TD> <TD ALIGN=RIGHT BGCOLOR="#D6DEFF">hot melt glue</TD> <TD ALIGN=LEFT BGCOLOR="#D6DEFF">sticks of hot melt glue for use with a glue gun to glue misc. parts</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Adhesives </TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#D6DEFF" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="4" SDNUM="1033;">4</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">Stepper Motor</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm length, 4-lead</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Linear motion legs & extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Steps 2.2, 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="5" SDNUM="1033;">5</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">microcontroller</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">Arduino Mega 2560 board</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="6" SDNUM="1033;">6</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">driver carrier board</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">RAMPS shield for Arduino</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="7" SDNUM="1033;">7</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">stepper driver module</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">A4988 Stepper Driver Module</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="8" SDNUM="1033;">8</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">lever microswitch</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">DPST miniature microswitch with lever</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="3" SDNUM="1033;">3</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="9" SDNUM="1033;">9</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">Thin hook-up wire</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">20 foot spool of 26 gage hook up wire, Yellow</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="10" SDNUM="1033;">10</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">Thicker hook-up wire</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">6 feet of red & black wire pair, 20 gage</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Assembling & wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Steps 2.5, 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="11" SDNUM="1033;">11</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">DC Power supply</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">12volt DC filtered power supply rated 6 amps</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="12" SDNUM="1033;">12</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">USB printer wire</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">8 foot long USB printer-connection type USB cable</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Assemble the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="13" SDNUM="1033;">13</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">crimp connectors</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">Dupont Jumper Wire Cable Female Pin Crimp Connector 2.54mm</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="50" SDNUM="1033;">50</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="14" SDNUM="1033;">14</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">crimp sockets, 4 wire</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">2.54mm 1x4P Dupont Connector Housing, Female</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="5" SDNUM="1033;">5</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="15" SDNUM="1033;">15</TD> <TD ALIGN=RIGHT BGCOLOR="#FADB91">crimp sockets, 2 wire</TD> <TD ALIGN=LEFT BGCOLOR="#FADB91">2.54mm 1x2P Dupont Connector Housing, Female</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Electronics</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#FADB91" SDVAL="5" SDNUM="1033;">5</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="16" SDNUM="1033;">16</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">electrical box</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">Raco 11.5-cu in 1-Gang Metal New Work Wall Electrical Box</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Linaer motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="6" SDNUM="1033;">6</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="17" SDNUM="1033;">17</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">electrical conduit</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">1/2” EMT, 10 ft section</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Linaer motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="18" SDNUM="1033;">18</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">conduit fitting</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">1/2” EMT connector, compression type</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Linaer motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="12" SDNUM="1033;">12</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="19" SDNUM="1033;">19</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">tension spring</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">3/8” x 1-15/32” x .035” extension spring</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Linaer motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="3" SDNUM="1033;">3</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="20" SDNUM="1033;">20</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">rubber feet</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">misc self-adhesive rubber feet for bottom of machine</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Assembling the machine</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="6" SDNUM="1033;">6</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="21" SDNUM="1033;">21</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">glass build plate</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">8” x 10” rectangular glass, 12” diameter circular mirror</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Assembling the machine</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="22" SDNUM="1033;">22</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">ball bearing</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">metric press fit bearing O.D 17mm x I.D. 6mm x 6mm thick</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="23" SDNUM="1033;">23</TD> <TD ALIGN=RIGHT BGCOLOR="#8FF8D5">steel balls</TD> <TD ALIGN=LEFT BGCOLOR="#8FF8D5">1/2 inch steel ball bearings</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Hardware</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Connector Rod</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#8FF8D5" SDVAL="12" SDNUM="1033;">12</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="24" SDNUM="1033;">24</TD> <TD ALIGN=RIGHT BGCOLOR="#EFC6C8">hot end for 3D printer</TD> <TD ALIGN=LEFT BGCOLOR="#EFC6C8">Assembled All Metal J-head Hotend with Cooling Fan for Bowden Extruder Reprap and tube for distance</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Hardware, specialty</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Center hub</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="2.1" SDNUM="1033;">2.1</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="25" SDNUM="1033;">25</TD> <TD ALIGN=RIGHT BGCOLOR="#EFC6C8">brass extruder gear</TD> <TD ALIGN=LEFT BGCOLOR="#EFC6C8">3D printer Bowden extrusion gear, I.D. 5mm, O.D. 10mm</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Hardware, specialty</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="26" SDNUM="1033;">26</TD> <TD ALIGN=RIGHT BGCOLOR="#EFC6C8">push-in fitting</TD> <TD ALIGN=LEFT BGCOLOR="#EFC6C8">nylon tube male connector push-in fitting for tube O.D. 4mm</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Hardware, specialty</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="27" SDNUM="1033;">27</TD> <TD ALIGN=RIGHT BGCOLOR="#EFC6C8">miniature ball bearings</TD> <TD ALIGN=LEFT BGCOLOR="#EFC6C8">metric press fit bearing O.D 10mm x I.D 5mm x 4mm thick</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Hardware, specialty</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="28" SDNUM="1033;">28</TD> <TD ALIGN=RIGHT BGCOLOR="#EFC6C8">spring - extruder tension</TD> <TD ALIGN=LEFT BGCOLOR="#EFC6C8">miniature round wire compression springs, O.D. 6mm, Length 20mm</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Hardware, specialty</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#EFC6C8" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="29" SDNUM="1033;">29</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">ball chain</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">stainless ball chain laniards for dog tags (30 inches long each)</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Linaer motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="6" SDNUM="1033;">6</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="30" SDNUM="1033;">30</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">wooden base/top</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">18” diameter pine wooden circle, 1-1/4” thick</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Assembling the machine</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="31" SDNUM="1033;">31</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">magnet</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">1/2” diameter x 1/4” thick rare earth magnet, countersink hole</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Center hub & linear motion legs</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Steps 2.1, 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="12" SDNUM="1033;">12</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="32" SDNUM="1033;">32</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">tube for extruder</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">FEP plastic tube, O.D. 4mm, length 95cm</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="33" SDNUM="1033;">33</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">machine grease</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">tube of synthetic machine grease for metal tubing & bearings</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Assemble the machine</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="34" SDNUM="1033;">34</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">sandpaper</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">sheets of 200 grit sand paper for sanding metal tubing</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Linear motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="35" SDNUM="1033;">35</TD> <TD ALIGN=RIGHT BGCOLOR="#A5C7DD">Zip ties</TD> <TD ALIGN=LEFT BGCOLOR="#A5C7DD">6” zip ties</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Misc</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Wiring the machine</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD">Step 2.6</TD> <TD ALIGN=CENTER BGCOLOR="#A5C7DD" SDVAL="20" SDNUM="1033;">20</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="36" SDNUM="1033;">36</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - motor mount</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M3 x 8mm long metric machine screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Linear motion legs & extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Steps 2.2, 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="16" SDNUM="1033;">16</TD> </TR> <TR> <TD HEIGHT=38 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="37" SDNUM="1033;">37</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - clamps & misc</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">#4 x 3/8 inch long pan head sheet metal screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Linear motion legs & machine assembly</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Steps 2.3, 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="50" SDNUM="1033;">50</TD> </TR> <TR> <TD HEIGHT=38 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="38" SDNUM="1033;">38</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - magnet mount</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">#8-32 x 1/2 inch long machine screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Center hub & extruder unit & linear motion legs</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Steps 2.1, 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="20" SDNUM="1033;">20</TD> </TR> <TR> <TD HEIGHT=26 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="39" SDNUM="1033;">39</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - box mounting</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">2-1/2 inch deck screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Assembling the machine</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.5</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="12" SDNUM="1033;">12</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="40" SDNUM="1033;">40</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - hotend mount</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">#6-32 x 3/4 inch long machine screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Center hub</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.1</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="41" SDNUM="1033;">41</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">nut - hotend mount</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">#6-32 zinc nuts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Cente hub </TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.1</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="42" SDNUM="1033;">42</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">nail - idler pulley</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">3/4” roofing nail, zinc coated, 1/8” diameter</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Linear motion leg</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="3" SDNUM="1033;">3</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="43" SDNUM="1033;">43</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">bolt - extruder shaft</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M5-0.80 x 45mm long hex cap bolt</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="44" SDNUM="1033;">44</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">nut - extruder shaft</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M5-0.80 nylon lock nut</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="45" SDNUM="1033;">45</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">washer - extruder shaft</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M5 flat zinc washer</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="46" SDNUM="1033;">46</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">setscrew - extruder</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M6 x 12mm long setscrew</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="47" SDNUM="1033;">47</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - extrude tension</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M3-0.5 x 40mm metric machine screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="48" SDNUM="1033;">48</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">screw - extruder hinge</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M3-0.5 x 30mm metric machine screw</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="1" SDNUM="1033;">1</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="49" SDNUM="1033;">49</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">wingnuts - extruder tension</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M3 metric wing nuts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="2" SDNUM="1033;">2</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="50" SDNUM="1033;">50</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">washer - extruder tension</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">M3 miniature flat zinc washers </TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Extruder unit</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.2</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="4" SDNUM="1033;">4</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="51" SDNUM="1033;">51</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">threaded rod</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">12 inch section of 1/4-20 allthread, steel zinc plated</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Connector rod</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.4</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="6" SDNUM="1033;">6</TD> </TR> <TR> <TD HEIGHT=16 ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="52" SDNUM="1033;">52</TD> <TD ALIGN=RIGHT BGCOLOR="#F0EBB1">nuts - connector rod</TD> <TD ALIGN=LEFT BGCOLOR="#F0EBB1">1/4-20 zinc nuts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Nuts & bolts</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Connector rod</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1">Step 2.3</TD> <TD ALIGN=CENTER BGCOLOR="#F0EBB1" SDVAL="12" SDNUM="1033;">12</TD> </TR> </TBODY> </TABLE> </BODY>

</HTML>

Retrieved from "https://reprap.org/mediawiki/index.php?title=Libro&oldid=156485"