HackerBot base
Revision as of 17:55, 12 June 2014 by Balestrino (talk | contribs)
HackerBot Documentation
Step 33: Assembling Base
| qty | part name | description/notes |
| 1 | Aluminum base 3mm | |
| 8 | M3x12 screw set |
Printer base can do with different materials. Our advice is to use a metal sheet of 3mm thickness. File:Metal Base AL-3mm.zip
Tighten the base using M3x12 screws:
Put four feets (M8 thread):
** BASE COMPLETE **
** GO TO >> HackerBot electronics **
