Category:Lautr3k Development
Lautr3k Documentation
Less specific
At the moment I can not find an alternative to the trinitylabs set : 10 start 25mm pitch fast lead screw and nut.
Half speed, 1/4 the price, but to short, 200mm : 10 threads per inch and has 5 starts, 2 turns per inch. http://buildyourcnc.com/item/mechanical-leadscrews-leadnuts-!5-5-starts-10-tpi
If any one know any other providers, I would be happy to know.
Others way could also be considered, such as threadless ballscrews
To do? or not to do?
- Better implementation of endstops.
- Change the extruder for a geared version.
-
Change NEMA17 3.6 kg/cm by 4.8 kg/cm for X/Y- Done! -
Speeds and quality tests.- Done... - Find less specific alternative lead screw.
- Build instructions. (10%)
Pages in category "Lautr3k Development"
The following 3 pages are in this category, out of 3 total.
