3d printer nelu
Release status: Working
| Description | 3D printer nelu
|
| License | GPL
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | 3d Printer
|
| CAD Models | |
| External Link |
under construction
3D printer nelu type printer is a nonlinear delta robot to remove the rods and linear bearings. Objective: Make a cheap printers as easily available parts.
Inspired by:
http://reprap.org/wiki/Delta https://hackaday.io/project/1565-icepick-delta https://hackaday.io/project/963-firepick-delta-the-open-source-microfactory
Materials used:
- M8 threaded rods. (3 pieces of 1M)
- Nuts M8
- 608ZZ bearings (6 pieces)
- PLA
- Copper pipe with outer diameter of 6 mm and 4mm inside the extruder. I FILOTE her outside with M6
- Brass nut clogged nozzle 0.4mm drill holes
- 4mm PTFE
For details visit https://sites.google.com/site/neludelta/3d-printer/delta-robot-nelu
