3d printer nelu
3d Printer Nelu
Release status: Working
Description | 3D printer nelu
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | 3d Printer
|
CAD Models | |
External Link |
under construction
3D printer nelu type printer is a nonlinear delta robot to remove the rods and linear bearings. Objective: Make a cheap printers as easily available parts.
Inspired by:
http://reprap.org/wiki/Delta https://hackaday.io/project/1565-icepick-delta https://hackaday.io/project/963-firepick-delta-the-open-source-microfactory
Materials used:
- M8 threaded rods. (3 pieces of 1M) - Nuts M8 - 608ZZ bearings (6 pieces) - PLA - Copper pipe with outer diameter of 6 mm and 4mm inside the extruder - Brass nut clogged nozzle 0.4mm drill holes - 4mm PTFE
For details visit https://sites.google.com/site/neludelta/3d-printer/delta-robot-nelu