Belt splitter jig
The belt splitter jig is needed to cut down wide belts. Mendel uses 5 mm wide belts, and stock belts usually come in either 10 mm or 15 mm widths.
The two RP part files for the belt splitter can be found in the cartesian bot files.
Name | Qty/assembly | Total Qty | Type |
belt-split-jig-10mm-belt-spacer_1off | 1 | 1 | RP |
belt-split-jig_2off.aoi | 1 | 1 | RP |
Box cutter/Stanley blade | 1 | 1 | Blade |
M4x40 cap | 4 | 4 | Fastener |
M4 nut | 4 | 4 | Fastener |
M4 washer | 8 | 8 | Fastener |