Archim2
Archim 2
Release status: Working
Description | 32-bit Rambo with Trinamic Drivers
|
License | Creative Commons Attribution-ShareAlike 3.0
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Related Pages: Archim v1.0 .:. Archim v1 Development .:. Archim v2.0 .:. Archim v2 Development .:. RAMBo
Summary
Archim 2 is a 3d printer controller based on the Atmel sam3x8e 32-bit processor (same as Arduino Due) and Trinamic TMC2130 stepper drivers all on one integrated PCB. Archim is named after the mathematician Archimedes.
Status
- Development Status: First batch prototypes of 2.0a hardware were run and available for Marlin Developers or Early Adopter Documentation Contributors.
- Still needs testing and firmware development.
Differences
The main difference from Archim 1.0 is the Trinamic TMC2130 drivers. Except for the drivers, the pin mapping and all the other aspects of Archim v1.0 are the same.
USB Driver
- Windows 10, Linux and Mac use CDC interface and have hardware driver built in.
- Windows legacy can use hardware driver: File:RAMBo USBdriver.zip
Troubleshooting
Lost COM port after flashing: Flashing the board using the Arduino Due core will cause the USB to not function. To fix perform a manual erase